How To Install Linux On Ps3 With Usb

Installation of the Linux operating system on a PS3™ system varies depending on the Linux. The storage media can be either a USB flash drive or a CD/DVD. Feb 13, 2018 - When you restart the PS3, plug a mouse and keyboard into the USB ports.' ,' The console will boot using your Ubuntu disc and install the new.

Jump to navigationJump to search

This guide describes how to get Linux on a PlayStation 3.

Important Note[edit]

The 'Other OS' feature, which is required to run Linux on the PS3, is disabled in firmware version 3.21, and later. But still runs on older consoles that have firmware 3.15 or lower. You will not be able to install Linux using this guide unless your PlayStation 3 has firmware 3.15 or lower. There is no official way to downgrade or rollback the firmware.

Pre-installation Configuration[edit]

Currently, Installing an 'OtherOS' requires you to re-format the hard drive. On 20Gb models the system allows two 10Gb partitions, while the 60Gb model offers a 10Gb/50Gb configuration for the OtherOS and the PS3 system. You can choose which operating system uses which partition. For this, you will need a USB drive with ~3Mb of free space, a PC with a DVD burner for the Linux Image, and a USB Keyboard and Mouse.

Installation[edit]

Installing Fedora Core 5 PPC will take the system around 2 hours.

Post-install Configuration[edit]

When installation is complete, the startup operating system can be changed.^[1] The system can be easily booted back into the cross media bar by holding down the power button while restarting.^[2] However, this will reset the system resolution to factory default. From Linux, you can switch to the XMB by typing boot-game-os at a prompt. This will restart the system to the XMB, but will boot back to Linux the next time you restart. Sony has set up a web page which will list compatible operating systems.^[3]

References[edit]

Wikipedia has related information at Linux for PlayStation 3

1. ↑'Default System'. Sony Computer Entertainment. http://manuals.playstation.net/document/en/ps3/current/settings/defaultsystem.html. Retrieved 2006-11-10.
2. ↑Chang, Vincent (2006-11-30). 'Linux on the PS3: First Encounters'. hardware zone. http://www.hardwarezone.com/articles/view.php?cid=1&id=2127. Retrieved 2006-11-30.
3. ↑playstation.com

http://phanboi.wordpress.com/2010/05...ntu-10-04-ps3/
NOTE: THIS IS A MODIFIED VERSION OF A TUTORIAL FOUNDHERE. I AM NOT RESONSIBLE FOR ANY DAMAGE DONE TO YOUR PS3


These instructions were only tested on a 40GB ps3 phat running firmware 3.15 NOT connected to the internet and I can personally confirm this works
There are more accurate guides available for those who want to install 7.10 or 8.04. Following this guide will probably be fine, but for more details follow those links!
Guide to installing Ubuntu 10.04 on the PS3
Many people installing Ubuntu 10.04 on there PS3 have been encountering mounting problems where after a successful installation of Ubuntu, the system boots up only to detect no drives with linux installed. Hence this guide is to help those that are stuck on installing this.

The PS3 has a unique feature that allows you to install a third-party operating system on the console. Because of its popularity and ease of use, Ubuntu Linux is a good choice. By installing Ubuntu, your PlayStation 3 becomes much more than just a game console. You can use it as a home computer (running desktop applications), a web- or file server, play media files, and run applications like Firefox, Open office and multimedia tools.
Installing Ubuntu 10.04 on the PS3 will take several hours (3-4 for me). The process involves three steps:

1. Formatting PS3 to run Linux
2. Installing Ubuntu
3. Setting up your PS Ubuntu installation

Set up your PS3 to run Linux
You have to format your PS3 hard drive to install Ubuntu. You will probably want to back up your save games! You will also need to let go of some 10GB of disk space.
What you need

• A PS3 Phat with firmware 3.15 or lower (I am assuming you have firmware 3.15)
• This Ubuntu version for the PS3 burnt to a CD <-- Link
• A USB keyboard and mouse
• A USB stick
• Petitboot v0.2 here – alt. here <-- Link
• Petitboot older version here – alt. here <-- Link

Formatting the PS3 hard disk
The first thing you need to do is to format the PS3s hard disk to make room for a second operating system (called Other OS). Your user profiles and account information will remain on the XMB, but remember to back up any saved games or media files you want to restore after formatting the PS3 using a USB stick or an external hard disk. Your game saves are located under Game > Saved Data Utility.
All downloaded games you paid for can be downloaded again without having to pay for them. They’ll be in your account history in the PS Store.

• Go to [System Settings] > [Format Utility].
• Select “Format Hard Disk” and click [Yes].
• Choose [Custom] and [Allot 10GB to the Other OS].
• Select [Quick Format] and confirm with [Yes].

Formatting will take a few seconds. Press X to restart the system.
Log in (you need to hit the PS button on your controller if it’s deactivated after restart).
Installing Other OS
The first step of this part of the installation is to install petitboot v0.2. Download the file with the link provided (it should be named “otheros.bld”

• Copy it to your USB stick in the folder; /PS3/otheros/
• Remove any discs from the PS3

• Connect the USB into the PS3
• Go to [System Settings] > [Install Other OS]
• Go to [System Settings] > [Default System]
• Select “Other OS” and hit “Yes” to restart the system
• Take out your USB and insert your keyboard and mouse

Note: If you get an error message that says “No applicable installer was found” this means that either the file was not found or that your external USB device was not detected (to check this you can open the music or video section in the XMB, the device should be listed there).

Loading the installer
This is where the otheros.bld we downloaded and installed first show up. You should see a nice little interface on the screen. If not then press the number 0, 1, 2, or 3 to cycle between screen resolutions until you are able to see petitboot on the screen.
Below is a list of functions for petitboot
Up, Down, Left, Right – Navigate between boot options
Enter – Select boot option
Delete / Backspace - Boot to PS3 XMB
0 - Safe
1 - Switch to 720p mode
2 - Switch to 1080i mode
3 - Switch to 1080p mode
Alt+F1 - Switch to text console
Alt+F2 - Switch back to GUI
Moving on, insert the Ubuntu CD which you burnt into the PS3. It might take a minute before the CD icon shows up, if it doesn’t after a while then try switching in between resolution modes, and when it does, click the icon and choose “install”(should be the first option on the disc).
Installing the base system
Once you’ve chosen install, a very basic screen should appear. Follow through the step by step installation.

• First choose a language for the installation process
• Then your geographical location
• The system can try to determine your keyboard or you can choose it from a list.
• The CD ROM is scanned, and additional term paper components are loaded.
• If your PS3 is connected to the internet via cable, choose eth0: Ethernet. Its better not to set up your wireless network here, unless you use WEP. Otherwise choose wireless and leave everything blank and continue. Skip the errors and then choose ‘do not setup an internet connection at this time’
• Disks and hardware is detected. If asked if you want to Activate Serial ATA RAID devices just choose yes (anyone know why?). (I was never asked, so this part is really unnecessary)
• When asked how to partition the disks, choose “Guided – use entire disk” (meaning the 10.7GB you formatted from the XMB in step 1)
• On the overview screen, hit “Finish partitioning and write changes to disk”. If asked to confirm, choose yes.
• The partition is formatted and base system installed. It should take about 10 minutes.
• Set up your user information (full name, username and password twice), and choose whether you would like to create a private encrypted directory for your user.
• Unless you’re using a proxy, leave the HTTP proxy information field blank (just hit enter). (I was never asked this part. So again, unnecessary)
• The system will start installing software. It might appear to hang at certain points, but just give the installer time and it will move on. The process will take a few hours (2-3 for me).
• System clock – Yes to UTC.

The installation is done! The CD will automatically eject itself, but you have to manually take it out of its slot (if you don’t, the PS3 will load it upon reboot). Then hit enter to continue after taking out the disc to boot into reboot into petitboot.
You will see nothing in petitboot. DO NOT PANIC!
Petitboot doesn’t support ext4, so we’re going to have to install the older version of petitboot.

• Press the delete/backspace button on the keyboard to boot into the PS3 XMB
• Download the older version of petitboot from the link given and replace the newer version with the older version on your USB
• Unplug the mouse or keyboard and insert the USB

• Go to [System Settings] > [Install Other OS]
• Go to [System Settings] > [Default System]
• Select “Other OS” and hit “Yes” to restart the system

Now you should be greeted not with a GUI but a command like interface with 5 or so options. These options are pretty straightforward, so select the first option (linux~) to boot into Ubuntu. Once greeted by the Ubuntu login screen, enter the user name and password you chose during installation.
Congratulations! You should now have a working Ubuntu Operating System installed on your PlayStation 3.
Move on to Setup PSUbuntu for tips on how to configure the screen resolution and making the OS run more smoothly.
Hopefully this helps people having trouble
phanboi.